Amazon terminates iRobot deal, Roomba maker to lay off 31% of staff::Amazon and iRobot said regulatory concerns made it impossible for the deal to move forward, sending the Roomba makers’ shares plummeting.
Amazon terminates iRobot deal, Roomba maker to lay off 31% of staff::Amazon and iRobot said regulatory concerns made it impossible for the deal to move forward, sending the Roomba makers’ shares plummeting.
What options are there out of the box? I only know of hacking well known brands and use something like valetudo
I’ve heard nothing but great things about Roborock.
I put a wemos d1 mini in mine since all I need to do is mash the existing Clean button. The internal MCU runs on 3.3v, the buttons are pulled low and activated by the same 3.3v rail, so all I had to do was flash it with ESPhome and wire the low side of the buttons to a gpio. I wanted to read the LED state but the multiplex scheme wasn’t worth decoding. I did use the single analog pin to measure battery voltage, and an input for the roller and blower motors.
Well done. I can’t tell if you’re shitposting or if this is legitimately the simplest home automation setup.
https://i.postimg.cc/BnsdHL8x/Screenshot-20240129-171247.png
https://i.postimg.cc/1tHgRNNJ/Screenshot-20240129-171945.png
I live my life like it’s a shitpost
That’s actually really awesome. Makes me want to get another vacuum
I used Shark Ion RV750 and RV750N. Basically no parts cross over but the layout is very similar. Both were straightforward to interface with and even had a little slot the board fit in!
Bro’s a menace to robot vacuum companies