• 0 Posts
  • 10 Comments
Joined 1 year ago
cake
Cake day: July 3rd, 2023

help-circle
  • I’m not sure it’s going to work like you hope it will. Your enclosure can run ‘raid’ but zfs doesn’t like raid. As far as ‘jbod’ thru one esata cable…thats not how zfs likes it either.

    Your best bet is to buy a m2/nvme to 5 sata port adapter so zfs can distinguish each drive. But then… the question is if your enclosure allows that.

    I love mini pc’s but for zfs there’s not a lot of wriggle room. High end ones have dual nvme ports allowing for zfs mirror. Other than that you’ll have to go said sata_nvme + an enclosure that powers all disks but allows for individual sata cables. It’s gonna be clunky macgyvering too.

    If I’m wrong I’ll accept the flak.






  • I respect that.

    Just keep in mind that the storage part of any setup you consider is the hard part. It also involves backup, which should be high on your priorities.

    As to Windows, l’m indebted to Bill for my livelihood… but for your testing, there is little value in virtualising windows OS: because you already know how Windows works. Go for linux instead, there’s a lot more going on there. And you can run linuxes with a lot less ram.


  • Thats a lot of money. I just bought a HP elitedesk g3 800 midtower for €82, incl psu but without cpu, from a local refurb site. Slightly dented but bios updated to this years version and cleaned… From ebay a €45 i5-7400 for 4c/4t as it can decode hevc 10bit for jellyfin. 32gig ram from ebay. 4 amazon SSDs I mounted in an icydock chassis that slots into the 5.25 bay. This is the expensive part, but its really clean and drives are ejectable like a rackserver. The chassis can hold 2 HDD for an additional zpool as well as an extra ssd. Also has an nvme slot for Proxmox OS and plenty of usb for Truenas style setups.

    For €82 there is a lot of value in that chassis.


  • The top question on yer decision tree is :

    is zfs part of it or not ?

    If it is, you need either a midtower/nas case with a decent amount of sata ports - like 4 or more. Or install a HBA in a pci slot which implies again a midtower or enterprise server. So if you want ZFS … all PI’s and nuc/TinyMiniMicro’s are out.

    But you can do all the rest with them : linux, vm’s, containers, reverse proxies, clustering… you name it. Just know your backup strategy will likely involve rsync which is fine. But factor in backup in yer design from the getgo, not just an afterthought.



  • Something I’m looking at myself is HP elitedesk 800 gen3 Tower. Mobo has 5 sata ports in addition to 1 nvme port. It takes 6/7th gen cpu so you could reuse your current cpu. 4 ram slots DDR4@2400.

    What is especially appealing is the 5.25 slot for which icydock has a powered bracket that takes and powers 4 SSD disks. (Edit: ejectable too). Sure the chassis has internal space to accomodate even more HDD.

    With Proxmox on the nvme + some raidz zfs action would make for a nice HCI setup. My next build and might inspire yours.