Look, I’m not attacking them over this, as you rightly said, it has plenty of other drawbacks and concerns, I’m just emphasising that Google do have a large degree of influence over them. For instance, Chromium is dropping manifest v2 support, so Brave pretty much has to do the same. They’ve said that, as Chromium has a switch to keep it enabled until June (iirc) they’ve enabled that, but after Chromium drops manifest v2 the most they can do is try to support a subset of it as best they can. The Brave devs may not want to drop support, but Google have decreed it will be dropped, so they end up dropping it and having to put in extra work to keep even a subset working for some period of time.

If Brave gets even a moderate market share, Google will continue to mess them around like this as they really don’t like people not seeing their adverts.

Ultimately it’s software, so the Brave devs can do pretty much whatever they want, limited by the available time and money. Google’s influence extends to making that either easier or harder, it much the same way as they influence the Android ecosystem.

They seem to have two levels of furniture; the flimsy, mostly made of particle board/cardboard and hope stuff, and the solid wood stuff. The latter is as robust any anything you’ll get elsewhere, even assembled, just easier to get home and takes some assembly. I suspect it’s mostly that that lasts, although even the lightweight stuff holds up well if you’re carefully with it.

Both Brave and Chrome are built on the open-source Chromium browser engine

That’s from the Brave website: https://brave.com/compare/chrome-vs-brave/

Yes there are plenty of changes, but it’s built on it, and shaped by it, and Chromium is heavily influenced by Google. If chromium doesn’t support v2 manifests it is unlikely that Brave will. In this particular case it may be that Brave’s ad blocking and privacy features are equivalent to uBO, but it’s still underpinned by an engine that Google has strong influence over, so it can’t completely shake their influence.

I know it’s trite to say “calm down Satan”, but, calm down Satan. You’ve captured the spirit of a Fae deal really well.

First Lad of the United States.

It’s a non-starter for me because I sync my notes, and sometimes a subset of my notes, to multiple devices and multiple programs. For instance, I might use Obsidian, Vim and tasks.md to access the same repository, with all the documents synced between my desktop and server, and a subset synced to my phone. I also have various scripts to capture data from other sources and write it out as markdown files. Trying to sync all of this to a database that is then further synced around seems overly complicated to say the least, and would basically just be using Trillium as a file store, which I’ve already got.

I’ve also be burnt by various export/import systems either losing information or storing it in a incompatible way.

It’s been years since I had to admin Windows servers, but I was quite impressed with the number of MS products where the install and configuration tools would output the Powershell commands to carry out the changes you’d asked for. It made it quite a lot easier to automate. I’d love to see that paradigm catch on more widely, with the GUI and CLI having the same functionality and the GUI giving you the commands to run.

I think that the point is it’s entirely pointless building something like this into the email system. It should be a separate system that you can choose to use if you want it. Building it in just opens questions about exactly what they’re doing with your data, despite their assurances.

Taxes don’t work like that. It’s only the portion above a level that’s taxed at that level.

I like it, this is clearly very enterprisey and solution focused, but I would like to suggest a couple of amendments if I may?

• Namespaces We should make full use of namespaces. Make the structural tags be in a language specific namespace (to be referenced in every function spec, obviously) but change the in an out params to use the parameter name as the tag, namespaced to the function they’re for, with a type attribute.

• In memory message queues Have all function invocations be marshaled as xml documents posted to an in memory message queue. Said documents should use a schema that validates the structure and a function specific schema to validate the types of arguments being passed. Namespace everything.

I reckon we could power a medium sided country if we could generate energy from the programmers despair.

If you’re talking about being able to regain access with no local backups (even just a USB key sewn into your clothing) your going to need to think carefully about the implications if someone else gets hold of your phone, or hijacks your number. Anything you can do to recover from the scenario is a way an attacker can gain access. Attempting to secure this via SMS is going to ne woefully insecure.

That being said, there are a couple of approaches you could consider. One option is to put an encrypted backup on an sftp server or similar and remember the login and passwords, another would be to have a trusted party, say a family member or very close friend, hold the emergency codes for access to your authentication account or backup site.

Storing a backup somewhere is a reasonable approach if you are careful about how you secure it and consider if it meets your threat model. The backup doesn’t need to contain all your credentials, just enough to regain access to your actual password vault, so it doesn’t need to be updated often, unless that access changes. I would suggest either an export from your authentication app, a copy of the emergency codes, or a text file with the relevant details. Encrypt this with gpg symmetric encryption so you don’t have to worry about a key file, and use a long, complex, but reconstructable passphrase. By this I mean a passphrase you remember how to derive, rather than trying to remember a high entropy string directly, so something like the second letter of each word of a phrase that means something to you, a series of digits that are relevant to you, maybe the digits from your first friend’s address or something similarly pseudo random, then another phrase. The result is long enough to have enough entropy to be secure, and you’ll remember how to generate it more readily than remembering the phrase itself. It needs to be strong as once an adversary has a copy of the file they jave as long as they want to decrypt it. Once encrypted, upload it to a reliable storage location that you can access with just a username and password. Now you need to memorize the storage location, username, password and decryption passphrase generator, but you can recover even to a new phone.

The second option is to generate the emergency, or backup, codes to your authentication account, or the storage you sync it to, and have someone you trust keep them, only to be revealed if you contact them and they’re sure it’s you. To be more secure, split each code into two halves and have each held by a different person.

I’ve found HSBC to be ok using Firefox on Linux. I don’t know if they have integrations with any accounting software, but the web access works well, and you can export your transactions for processing locally.

ETA: I’ve run small business accounting on Gnucash, I found the learning curve a bit steep, but once you ‘get it’ it’s handy.

Sorry for the slow reply, life occurred.

I think I understand where you’re coming from with the desired to be productive and not reinstall. I think I’ve been there too! One thing that I can suggest, if you do have the time, is to learn a system like Ansible and use it to setup and configure your machine. The discipline of keeping all of the config as source rather than making ad-hoc changes reduces the chance of thinking you’ll make just one little change and breaking something, and, if something does go wrong, you can get back to your working configuration quickly.

Bearing in mind that there really isn’t anything you can do to stop yourself if you’re really determined to not lose the data, because if you can read it at any time you can back it up, the closest you are likely to come is something like creating new key with GPG then using the TPM to wrap your secret key and deleting the original. That way the key is only usable on that specific machine. Then use the key-pair to encrypt your ‘guard’ files. You can still decrypt them because you have the wrapped secret keys and you’re on the same machine, but if you wipe the drive and lose those keys the data is gone. The TPM wrapping prevents you from taking the keys to a different machine to decrypt your data.

There’s an article with some examples here,

Having said all of that, this still doesn’t help if you just clone the disk as all of the data, including the wrapped key and the encrypted files will be cloned. The one difference there is that the serial number of the hard drive will be different. Maybe you could use that, combined with a passphrase as the passphrase for your GPG key, but we’re getting into pretty esoteric territory here. So you could generate a secret key with a command like:

( lsblk -dno SERIAL /dev/sdb ; zenity --title "Enter decrypt password" --password) | sha1sum | cut -c1-40

Where /dev/sdb is the device your root partition is on. zenity is a handy utility for displaying dialogs, there are others available. In this use it just prompts for a passsword. We then concatenate the drive serial number from lsblk with the password you entered and hash the result. The hashing is really only a convenient way to mix the two without worrying about the newline lsblk spits out. Don’t record the result of this command, but use it to set the passphrase on your new GPG key. Wrapping the secret key in the manner the article above suggests is a nice extra step to make it harder to move the drive to another machine or mess around in that sort of way, but not strictly necessary as that wasn’t in the scope of your original question.

Now you can encrypt your file with: gpg -e -r <your key name> <your file>'. That will produce an encrypted version of <your file>called<your file>.gpg. To decrypt the file you can get gpg` to use the hashing command from above to get the passphrase with something like:

gpg -d --pinentry-mode=loopback --batch --passphrase-fd 3 <your file>.gpg 3< <( ( lsblk -dno SERIAL /dev/sdb ; zenity --title "Enter decrypt password" --password) | sha1sum | cut -c1-40 )

Once you’ve tested that you can decrypt the file successfully you can remove the original, plaintext, file. Your data is now encrypted with a key that is secured with a passphrase made of a string you know and the serial number of your disk and optionally wrapped with a key from the TPM that is tied to your physical machine. If you change the disk or the machine the data is irretrievable (ignoring the caveats discussed above). I think that’s about as close to your original goal as you can get. It’s rough around the edges, and I’m not sure I’d trust my data to it, but I believe it’ll work. If you do something like this, please test it thoroughly, I can’t guarantee it!

Yes, yes, but now lets take that, make it dependent on the session management system and dns resolver for some reason, make the command longer and more convoluted and store the results in one or more of a dozen locations! It’ll be great!

/s

Dconf is bad, just imagine how bad a systemd version would be.

I think the difference is the level it’s happening at. As I said, I haven’t tried it yet, but it looks like a simple, unfussy and minimal distribution that you then add functionality to via configuration. Having that declarative configuration means it’s easy to test new setups, roll back changes and even easily create modified configuration for other servers.

cries It’s amazing how much damage they’ve done to the linux ecosystem. Not just badly thought out concepts, but the amount of frustration and annoyance they caused by ramming it into existence and the cynicism it’s created.

He may have taken some ideas from there, but I still see more windows like ideas. We’re one bad decision away from systemd-regedit. If that happens, I might just give up completely.

In news that will shock no-one, dbus was, of course, initially created by a Redhat engineer. I get the idea of having a general purpose bus that everything can communicate on, but they somehow managed to even make that complex.

You make a compelling case for Void Linux. I use Debian or a RHEL derivative for work, primarily so there’s at least a chance to hand systems off to someone else to maintain, the less known distros seem to meet with blank looks.

I want to give NixOS a try sometime, as I like the idea of declaritively defining the system

I do use Ansible, partly because it’s easier to tell people that’s how you do it rather than “I wrote a shell script, it took half the time to write, it’s 20% the size and runs several times faster”. To be fair to Ansible, if you’re configuring a number of servers at the same time, it’s not too bad speedwise as it’ll do batches of them in parallel. Configuring one server at a time is agony though.

I’ve never actually tried BTRFS, there were a few too many “it loses all your data” bugs in the early days, and I was already using ZFS by then anyway. ZFS has more than it’s fair share of problems, but I’m pretty confident my data is safe, and it has the same upsides as BTRFS. I’m looking forward to seeing how BCachefs works now it’s in kernel, and I really want to compare all three under real workloads.