• ikidd@lemmy.world
    link
    fedilink
    English
    arrow-up
    19
    arrow-down
    3
    ·
    4 months ago

    NAT still has its place in obfuscating the internal network. Also, it’s easier to think about firewall/routing when you segregate a network behind a router on its own subnet, IMO.

    • eclipse@lemmy.world
      link
      fedilink
      arrow-up
      12
      arrow-down
      1
      ·
      4 months ago

      Given how large the address space is, it’s super easy to segregate out your networks to the nth degree and apply proper firewall rules.

      There’s no reason your clients can’t have public, world routeable IPs as well as security.

      Security via obfuscation isn’t security. It’s a crutch.

      • efstajas@lemmy.world
        link
        fedilink
        arrow-up
        10
        arrow-down
        1
        ·
        edit-2
        4 months ago

        There’s no reason your clients can’t have public, world routeable IPs as well as security.

        There are a lot of valid reasons, other than security, for why you wouldn’t want that though. You don’t necessarily want to allow any client’s activity to be traceable on an individual level, nor do you want to allow people to do things like count the number of clients at a particular location. Information like that is just unnecessary to expose, even if hiding it doesn’t make anything more secure per se.

        • r00ty@kbin.life
          link
          fedilink
          arrow-up
          12
          ·
          4 months ago

          Well good news. Because ipv6 has a thing called privacy extensions which has been switched on by default on every device I’ve used.

          That generates random ipv6 addresses (which are regularly rotated) that are used for outgoing connections. Your router should block incoming connections to those ips but the os will too. The proper permanent ip address isn’t used for outgoing connections and the address space allocated to each user makes a brute force scan more prohibitive than scanning the whole Ipv4 Internet.

          So I’m going to say that using routable ipv6 addresses with privacy extensions is more secure than a single Ipv4 Nat address with dnat.

    • frezik@midwest.social
      link
      fedilink
      arrow-up
      7
      arrow-down
      1
      ·
      4 months ago

      Obfuscation is not security, and not having IPv6 causes other issues. Including some security/privacy ones.

      There is no problem having a border firewall in IPv6. NAT does not help that situation at all.

      • ikidd@lemmy.world
        link
        fedilink
        English
        arrow-up
        7
        arrow-down
        1
        ·
        4 months ago

        Obfuscation is not security

        Yes, of course. But saying trite things like that doesn’t get around the idea that giving out a map of the internal network by default isn’t the best policy.

        • frezik@midwest.social
          link
          fedilink
          arrow-up
          4
          arrow-down
          3
          ·
          4 months ago

          So instead we open up a bunch of other issues.

          With CGNAT, governments still spy on individual addresses when they want. Since those individual addresses now cover a whole bunch of people, they effectively spy on large groups, most of whom have nothing to do with whatever they’re investigating. At least with IPv6, it’d be targetted.

          NAT obscurity comes at a cost. Its gain is so little that even a small cost eliminates its benefit.

          • ikidd@lemmy.world
            link
            fedilink
            English
            arrow-up
            3
            ·
            edit-2
            4 months ago

            Governments are not anyone’s issue other than other governments. If your threat model is state actors, you’re SOL either way.

            Making it harder for everyone else is the goal, and to do that you need a swiss cheese model. Hopefully all the holes don’t line up between the layers to make it that much harder to get through. You aren’t plugging all the holes, but every layer you put on makes it a little bit harder.

            And NAT is not just simple to set up, it’s the intuitive base for the last 30 years of firewalls. I don’t see where you get a cost from it. As I said, separating network spaces with it comes naturally at this point. Maybe that’ll change, but I remember using routable IPV4 when it was it the norm, and moving to NAT made that all feel way more natural.

            • frezik@midwest.social
              link
              fedilink
              arrow-up
              4
              ·
              4 months ago

              Governments are not anyone’s issue other than other governments. If your threat model is state actors, you’re SOL either way.

              That’s a silly way to look at it. Governments can be spying on a block of people at once, or just the one person they actually care about. One is clearly preferable.

              Again, the obscurity benefit of NAT is so small that literally any cost outweighs it.

              I don’t see where you get a cost from it.

              • Firewall rules are more complicated
              • Firewall code is more complicated
              • Firewall hardware has to be beefier to handle it
              • NAT introduces more latency
              • CGNAT introduces even more latency
              • It introduces extra surface area for bugs in the firewall code. Some security related, some not. (I have one NAT firewall that doesn’t want to setup the hairpin correctly for some reason, meaning we have to do a bunch of workarounds using DNS).
              • Lots of applications have to jump through hoops to make it through NAT, such as VoIP services
              • Those hoops sometimes make things more susceptible to snooping; Vonage VoIP, for example, has to use a central server cluster to keep connections open to end users, which is the perfect point to install snooping (and this has happened)
              • . . . and that centralization makes the whole system more expensive and less reliable
              • A bunch of apps just never get built or deployed en masse because they would require direct addressing to work; stuff like a P2P instant messenger
              • Running hosted games with two people behind NAT and two people on the external network gets really complicated
              • . . . something the industry has “fixed” by having “live service” games. In other words, centralized servers.
              • TLS has a field for “Server Name Indication” (SNI) that sends the server name in plaintext. Without going far into the details, this makes it easier for the ISP to know what server you’re asking for, and it exists for reasons directly related to IPv4 sticking around because of NAT. Widespread TLS use would never have been feasible without this compromise as long as we’re stuck with IPv4.

              We forced decisions into a more centralized, less private Internet for reasons that can be traced directly to NAT.

              If you want to hide your hosts, just block non-established, non-related incoming connections at your firewall. NAT does not help anything besides extending IPv4’s life.

        • frezik@midwest.social
          link
          fedilink
          arrow-up
          3
          arrow-down
          1
          ·
          edit-2
          4 months ago

          But why bother? “Let’s make my network slower and more complicated so it works like a hack on the old thing”.

    • zurohki@aussie.zone
      link
      fedilink
      English
      arrow-up
      6
      ·
      4 months ago

      That’s what temporary privacy addresses are for. Clients can just keep generating new addresses in your /64, which is it’s own subnet.