Pretty much every first party Nintendo game, especially Mario and the Zelda series. I’ve had some enjoyment from the 2D era Zelda games at least, but have yet to finish any of them as they just don’t seem to hold my attention.

I’ll reserve my judgement on the most recent Zelda game as I understand it’s quite different from the classic 3D and 2D games, but I don’t have any particular desire to give Nintendo money given their increasingly lawyer heavy behaviour.

Unless something has changed recently, OPNSense doesn’t have an ARM build so it won’t work on the Pi4.

If you want to use the PI as a router you’ll probably end up with a double NAT situation which isn’t ideal but may work well enough. In terms of wifi performance, I wouldn’t expect a Pi to be particularly good here so I’m not sure this even worth it unless it’s just a budget issue and you don’t have any other options.

In terms of your problem, you should be able to assign the Pi ethernet port to the default WAN and WAN6 networks. As for wifi, the Pi adapter needs to have support for AP mode, and looking around it doesn’t seem clear if the built in wifi adapter supports that or not (most people using the Pi are using it purely as a router and not a wireless AP). If not, you’d need a USB wifi adapter that supports AP mode. You might want to get that additional ethernet adapter too for testing/debugging and it will allow you to add a dedicated wireless AP.

It’s nice not to deal with HTTPS warnings etc and as you said it’s more convenient to access by domain name rather than remembering port numbers. You should be able to technically achieve the latter in another way by using docker and configuring it to assign a real IP for each service (a bridge network presumably), then setting each service to use port 80 externally. But that’s probably as much work as just setting up a reverse proxy.

And if you’re concerned about exposing ports, you can use DNS challenge which doesn’t require opening port 80 on your router.

Depends on how you define “sufficient”. Having some amount of swap can be helpful for efficient use of RAM, but I personally prefer to use zram for those cases.

A swap partition can also be useful if you use hibernation.

I haven’t tested the ebook functionality and I mostly use it for podcasts, but you should be able to download on the mobile client at least.

And if you’ve hosted it at home it will continue to work on the LAN if your internet connection goes down.

Assuming the Switch supports ipv6, and given how backward Nintendo’s tech tends to be, it wouldn’t surprise me if they didn’t.

Although at least nintendo.com has an AAAA record.

Weimar Republic vibes. Will conservatives think they can control fascists and that they “won’t be that bad”? Hopefully they come to their senses, but I’m not holding my breath.

The last time I tried a rebase from Kinoite to Bazzite it left me with a weird set of flatpaks and removed Firefox somehow

There’s a warning against this in the Bazzite FAQ, so that’s not too surprising. It’s referring to DEs, but different “distributions” also applies I presume. I hope that becomes solved in the long run, as it is one of the current downsides with Silverblue etc

Yes, and consider using zstd (if it’s not the default on your distribution) and be pretty aggressive with the disk size since it has a high compression ratio. I normally set it to 100% (so zram disk size = physical RAM size), but you can experiment with different values.

I had a quick look and found that yomitan supports Korean as well. This won’t help your reviews directly, but it will help with being able to quickly look up words when you’re trying to read something.

EDIT: And a dictionary to use with it.

Yeah, that’s annoying. You probably need some other resources to help things stick, but I can’t help you on Korean.

Using mnemonics of some kind can be helpful, even if it’s nonsensical (or perhaps especially if it’s nonsensical).

Anki and some pre-built decks at my level. I’m sure there is something for Korean out there.

Volume is weird, i feel like i’d almost like either a “volume target” option, to match volume levels between content, or some sort of fixed audio boost level. Idk.

Adding replaygain tags to your content could help here, but it’s a manual process, particularly since it’s not normally included in released videos. And I’m not sure if jellyfin supports replaygain tags from video (presumably it does for audio only files).

mpv definitely does support it at least, with “–replaygain=track”.

Of course, none of this helps with OPs situation, because enabling replaygain will actually lower the volume on most files, so it can account for high dynamic range content.

The situation is a lot better with music, but it’s not perfect. There’s still issues with region locking content, and content only existing on one service and not another.

Most people are talking about fossil fuels in terms of electricity and transport, which can and should be transitioned to renewable energy and electric vehicles as fast as possible (ideally with some people moving away from cars altogether).

And the poll itself is specifically talking about renewable energy, so it’s not like the article is confused on that point.

Yes, manufacturing is a harder problem, especially when it’s not just used as an energy source. But the easier problems need to be attacked as quickly as possible to reduce the risk of runaway climate change.

I think there are more people that are #1 and #2 the same time

Probably where some of the attitude comes from. People are assuming that it’s paid IT people bringing their work home with them, which is a different case then a casual user trying out self-hosting without the broader background.

Although I haven’t seen this attitude myself so I suspect it’s not that common, and probably just a handful of users jumping to conclusions.

I haven’t tried it, but Tube Archivist may fit the bill.

The downside with ULA is that ipv4 is given preference, which is annoying on dual stack networks. I believe there is a draft RFC to change this but it will take a while for it to be approved and longer still for OSes to change their behaviour. I workaround it by using one of the unused (but not ULA) prefixes.

Pretty cool especially since it’s RISC-V. I’d have some concerns about the software and driver side of things, though (and the performance).